主選單
購物車

INON

品牌: INON Model: inon_m5_screw
[說明] INON M5 短螺絲 (浮力燈臂, S-2000 磁鐵螺絲)..
NTD90
品牌: INON Model: 4570018120404
[說明] INON M52 冷靴鏡頭座 (Shoe Base) 可以直接連接到防水盒頂部的冷靴配件座。 無需燈臂即可放置鏡頭,從而使整個系統變得簡潔。  實際安裝例子: 搭配 Olympus PT-059 防水盒 (TG-6)..
NTD1,400
品牌: INON Model: 4562121439733
[說明] 單邊 M52 鏡頭座 S 重量: [空氣] 54 g/1.9 oz, [水底] 約 28 g/1.0 oz 此M52鏡頭座可以直接鎖在INON 一般燈臂, 如有任何疑問, 歡迎聯絡 [email protected], 此鏡頭座也可以相容 有些鏡頭使用52轉67轉接環, 如 UFL-M150 ZM80  M27-M67 + Mount Converter for UFL-M150 ZM80/Step-up Ring 52-67...
NTD1,320
品牌: INON Model: 4562121439740
[說明] 雙邊 M52 鏡頭座 W 重量*: [空氣] 104 g/3.7 oz, [水底] 約 50 g/1.8 oz  此M52鏡頭座可以直接鎖在INON 一般燈臂, 如有任何疑問, 歡迎聯絡 [email protected], 此鏡頭座也可以相容 有些鏡頭使用52轉67轉接環, 如 UFL-M150 ZM80  M27-M67 + Mount Converter for UFL-M150 ZM80/Step-up Ring 52-67...
NTD1,980
品牌: INON Model: 4562121436558
[說明] INON M5圓球底座轉接盤 (M5 Plate Direct Base III) 可用在一些使用M5尺寸螺絲的系統要轉接圓球底座用 (Direct Base III) 更多詳細訊息請聯絡: [email protected] ■ 重量: (陸上) 19g / (水中) 約13g  ■ 防水盒或其他廠牌燈臂系統 規格: (兩螺絲孔需 24mm ~ 28mm 寬, 深度需有6mm..
NTD790
品牌: INON Model: 4562121436572
[說明] The INON M5 Joint 轉接頭主要是用來轉接 INON Direct Base III 圓球底座 到INON新的多圓球燈臂與雙球棒型燈臂. (* 1), . 上面可再轉接LED燈(* 2)與其他閃燈. (* 1) "多圓球燈臂 SS" 無法安裝. (* 2) 轉接成INON Direct Base III 圓球底座後,需要INON Clamp III箝制夾. ■ 重量: (陸上) 24g / (水底) 約 15g ■ 支援燈臂 雙球棒型燈臂 XS / SS / S / M / L 多圓球燈臂 S / ML /..
NTD690
品牌: INON Model: 4562121439566
[說明] INON M6 Base Screw Set 底座螺絲組 (for Grip Base D5) Grip Base D5 搭配 INON Mount Base/Lens Adapter Base/Video Base 使用..
NTD1,100
品牌: INON Model: 4570018120398
[說明] INON M67 冷靴鏡頭座 (Shoe Base) 可以直接連接到防水盒頂部的冷靴配件座。 無需燈臂即可放置鏡頭,從而使整個系統變得簡潔。  實際安裝例子: 搭配 Olympus PT-059 防水盒 (TG-6)..
NTD1,400
品牌: INON Model: 4570018120343
[說明] 用於將 M67 口徑微距鏡轉換成 XD 卡口 * “M67-XD 卡口轉換環”可配備 M67 廣角轉換鏡頭,但需注意因為防水盒鏡罩表面與廣角轉換鏡頭之間的距離較大可能會產生暗角。 [XD Mount 介紹影片]..
NTD1,000
品牌: INON Model: 4562121437890
[說明] 燈臂鏡頭座 DP 系列產品 可透過各種轉接頭放置 UWL-S100 ZM80/UFL-M150 ZM80 包括現有的 M67/AD/LD 系列鏡頭。..
NTD1,420
品牌: INON Model: 4562121431713
[說明] A lens holder attached on an arm body, "D Holder Extension Bar", "Grip Base DIII w/ Rubber Grip D" etc. to carry M67 series/28M67 series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder Base of this product. ■ 重量: 62g (2...
NTD1,420
品牌: INON Model: 4562121431720
[說明] A lens holder attached on an arm body etc. to carry M67/28M67 series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder [hole], or Lens Holder [screw] and Lens Holder Base of this product. The Lens Holder [hole] is usable as like "M67 Lens Hol..
NTD2,210
顯示 25 - 36 / 137 (共 12 頁)