Menu
Your Cart

INON SD Front Mask STD for Gopro 3/3+/4 (40m)

INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)
INON SD Front Mask STD for Gopro 3/3+/4 (40m)

[Description]

■SD Front Mask STD■

The SD Front Mask STD is a multi-purpose product to attach INON SD Mount series attachment lens, arm etc. on a packaged genuine "Standard Housing - 131' (40m)" for GoPro® HERO4 / HERO3+ and GoPro® HERO / HERO+ / HERO+LCD.

● Why SD Front Mask STD? ●

The INON SD Front Mask for STD is designed to benefit GoPro camera users to utilize packaged standard housing to enjoy quality underwater imaging with simple and budget system.

Flexible upgrade is available with optional GoPro® Dive Housing – 197' (60m) and INON "SD Mount Cage for HERO3/3+/4" with same attachment lenses and arm products.

 

■ SD Front Mask STD Features ■

•Compatible with a packaged GoPro Standard Housing - 131' (40m) for “HERO4” “HERO3+” and “HERO” “HERO+” “HERO+LCD” (Not compatible with HERO4 Session)

•Easy to install to snap on the front of a housing and fix with a thumbscrew.

•Made of reinforced plastic (FRP) for durability and not to compromise benefit of lightweight GoPro camera system.

•Equipped with INON “SD Mount” bayonet system with locking system to support easy and speedy exchange as well as reliable installation of compatible SD Mount lenses. Of course the SD Front Mask STD is usable without any attachment lens (*2).

•INON “Direct Base III”, “Z Joint” or “Z Adapter MV” can be attached on the bottom of the SD Front Mask STD.

•Installing packaged "Male Adapter (GoPro®)" on the bottom of this product utilizes your GoPro® compatible accessories.

•Packaged “Mount Adapter for SD Front Mask STD” enables to add the optional “D Holder” on the left side of the bottom of this product. This Mount Adapter further enables to attach the SD Front Mask STD on a tripod or monopod.

•Compatible with LCD BackPac™, Battery BackPac™.

● Compatible Lens ●

•UFL-G140 SD Underwater Semi-fisheye Conversion Lens (*3)(*5)

•UCL-G165 SD Underwater Wide Close-up Lens (*4)(*5)

 

(*1) Compatible housing is GoPro® genuine “Standard Housing - 131' (40m)". Not compatible with packaged “Dive Housing – 197' (60m)" for “HERO3”. (“HERO4” “HERO3+” comes with “Standard Housing”).
(*2) When using on land, set FOV mode other than [Wide] or use without this product to prevent vignetting observed mainly in ultra wide mode even without an attachment lens. (No vignetting underwater)
(*3) This lens is designed only for underwater use. (When using on land, distant subject is not in focus and angle of view is not as wide as rated)
(*4) This lens is designed only for underwater use. (When using on land with FOV setting [WIDE], vignetting will be observed)
(*5) Not usable for “SuperView™ mode” as this mode adds software-based deformation effect enhancing more aberrations when using an attachment lens.

[Specifications]

  • Size (including protruded parts) Width: 67.9mm(2.7in), Height: 79.3mm(3.1in), Depth: 37.8mm(1.5in)
  • Weight (air) 42g(1.5oz) (underwater) 13g(0.5oz)
  • Material Polycarbonate, POM etc.

Write a review

Please login or register to review
US$55
  • Stock: In Stock
  • Model: 4562121438224